Set Date & Time on Ingenico Tetra Devices

StoreTender supports the following Ingenico Tetra Payment Devices:
  • Lane/3000
  • Lane/7000


In order to accurately report the date and time of card transactions on receipts, you may have to perform additional configuration steps. If the date and/or time are incorrect on your device, you'll need to follow these steps:

 

  1. Exit POS to Main Menu, so that Terminal displays "Welcome".
  2. Type “2634” at the Welcome screen.
  3. Press the "F" button to get to the Menu.
  4. Select “Tetra Admin”.
  5. Select “Set Date and Time”.
  6. Select “Set Date”.
  7. Enter date in mm/dd/yyyy format and press “Enter (Green)” key.
  8. Select “Set Time”.
  9. Enter time in 24-hour hh:mm format and press “Enter (Green)” key. (5:15 pm is 17:15)
  10. Press “Cancel (Red)” key 3 times to return to Welcome screen.

?האם התשובה שקיבלתם הייתה מועילה

 הדפסת המאמר

קראו גם

Brecknell 67XXU USB/Serial POS Scale

StoreTender supports the use of the Brecknell 67XXU POS Scale, when used with a serial cable. A...

Customer Display Screen

You can use any LCD computer monitor as a customer display and add multimedia features like...

Receipt Printer

StoreTender supports receipt printers from a wide variety of manufacturers. This guide will help...

Specialized Label Printer

    Programming Your Label Printer   If you're using a specialized label printer, like the...

Barcode Scanner Not Fully Entering Numbers

Programming Tips   Some barcode scanners, when new, may need some "tweaking" to get them...